News
News

06

2023

-

01

Composition of industrial machine vision system

所属分类:


【概要描述】With the development of industrial automation, the application of industrial machine vision system will also be more and more extensive. In addition, the rapid development of digital image sensors, CMOS and CCD cameras, DSP, FPGA, ARM and other embedded technologies, image processing and pattern recognition technologies will also bring a huge boost to the development of machine vision inspection. Here is a brief introduction of the main components of industrial machine vision system: 1. Camera and optical components This category usually contains one or more cameras and lenses (optical components) for photographing the detected object. According to the application, the camera can be based on the following standards: black and white, composite color (Y/C), RGB color, non-standard black and white (variable scan), step scan or line scan. 2. Lights The light of industrial machine vision system is used to illuminate components, so as to capture better images from the camera. The light system can be in different shapes, sizes and brightness. The general light forms are high-frequency fluorescent lamps, LED, incandescent lamps and quartz halide optical fibers. 3. Component sensor It usually appears in the form of grating or sensor. When the sensor senses that the component is close, it will give a trigger signal. When the component is in the correct position, the sensor will tell the machine vision system to collect the image. 4. Image acquisition card Also known as video capture card, this part is usually a card inserted on the PC. The function of this capture card is to connect the camera with the PC. It obtains data (analog signal or digital signal) from the camera and then converts it into information that the PC can process. Industrial machine vision system can also provide signals to control camera parameters (such as trigger, exposure time, shutter speed, etc.). There are many types of image capture cards, Support different types of cameras and different computer buses.

With the development of industrial automation, the application of industrial machine vision system will also be more and more extensive. In addition, the rapid development of digital image sensors, CMOS and CCD cameras, DSP, FPGA, ARM and other embedded technologies, image processing and pattern recognition technologies will also bring a huge boost to the development of machine vision inspection. Here is a brief introduction of the main components of industrial machine vision system:
1. Camera and optical components
This category usually contains one or more cameras and lenses (optical components) for photographing the detected object. According to the application, the camera can be based on the following standards: black and white, composite color (Y/C), RGB color, non-standard black and white (variable scan), step scan or line scan.
2. Lights
The light of industrial machine vision system is used to illuminate components, so as to capture better images from the camera. The light system can be in different shapes, sizes and brightness. The general light forms are high-frequency fluorescent lamps, LED, incandescent lamps and quartz halide optical fibers.
3. Component sensor
It usually appears in the form of grating or sensor. When the sensor senses that the component is close, it will give a trigger signal. When the component is in the correct position, the sensor will tell the machine vision system to collect the image.
4. Image acquisition card
Also known as video capture card, this part is usually a card inserted on the PC. The function of this capture card is to connect the camera with the PC. It obtains data (analog signal or digital signal) from the camera and then converts it into information that the PC can process. Industrial machine vision system can also provide signals to control camera parameters (such as trigger, exposure time, shutter speed, etc.). There are many types of image capture cards, Support different types of cameras and different computer buses.


BARTEC explosion-proof switch-Germany BARTEC limit type micro switch/travel switch

BARTEC explosion-proof switches are special-purpose switches developed by the renowned German company BARTEC, which was founded in 1975 in Baden-Württemberg.

MORE +

Comparison between optical fiber sensor and traditional sensor

At present, in the Chinese market, fiber Bragg grating (equipped with ASE broadband light source) and distributed sensor based on optical time-domain reflection are the most widely used optical fiber sensing technologies. This technology can basically meet the needs of the medium and low end general market and is well known by industry insiders. The single-frequency fiber laser with spectral linewidth as narrow as 2 kHz and the latest generation of optical sensing technology introduced now are completely different from the optical fiber sensing we now know. This new technical solution can fully meet the higher demand for ultra-long distance, ultra-high precision and ultra-high sensitivity in the high-end market, which cannot be completed by electric sensing and general optical fiber sensing. However, this technology is still in the stage of project approval and pre-research in China. Compared with traditional sensing technology, fiber-based sensors have the following major advantages: 1. Light weight, compact structure, easy to reuse in multiple ways; 2. Resistance to harsh environment, electromagnetic interference and chemical corrosion; 3. There is no need for electricity at the sensing point, and long-distance distributed sensing is possible; 4. Low cost mass production After optical fiber communication, optical fiber sensing has also ushered in an important development opportunity. It has extensive and huge application value in security, military, oil/gas, electricity and scientific research, especially in western developed countries. The optical principle of single-frequency fiber laser for optical sensing is optical frequency time-domain reflection.

MORE +

Structure principle and classification of optical fiber sensor

1. Structure principle of optical fiber sensor The traditional sensor based on electricity is a device that converts the measured state into measurable electrical signals. Its power supply, sensitive components, signal receiving and processing system and information transmission are all connected with metal wires. Optical fiber sensor is a device that converts the measured state into a measurable optical signal. It is composed of optical transmitter, sensing element (optical fiber or non-optical fiber), optical receiver, signal processing system and optical fiber. The light emitted by the optical transmitter is guided to the sensitive element through the source optical fiber. At this time, a certain property of the light is modulated by the measured, and the modulated light is coupled to the optical receiver through the receiving fiber, so that the optical signal is converted into an electrical signal, and finally the desired measured signal is obtained through signal processing. It can be seen that the optical fiber sensor is essentially different from the traditional sensor based on electricity in measuring principle. Traditional sensors are based on mechanical-electrical measurement, while optical fiber sensors are based on optical measurement. Light is a kind of electromagnetic wave, whose wavelength ranges from 1 mm in the far infrared to 10 nm in the far ultraviolet. Its physical and biochemical effects are mainly caused by the electric field. Therefore, when discussing the sensitive measurement of light, we must consider the vibration of the electric vector E of light, namely A - amplitude vector of electric field E; ω—— Vibration frequency of light wave; φ—— Optical phase; T - propagation time of light. It can be seen that as long as one of the parameters such as the intensity, polarization state (direction of vector A), frequency and phase of the light changes with the change of the measured state, or is modulated by the measured state, then the required measured information can be obtained by adjusting the intensity modulation, polarization modulation, frequency modulation or phase modulation of the light. 2. Classification of optical fiber sensors Note: MM multimode; SM single mode; PM polarization maintenance; a. B, c functional type, non-functional type, pickup type

MORE +

The exhibition of the first Fuji Electric Import Expo ended smoothly

The China International Import Expo is a major measure taken by the Chinese government to firmly support trade liberalization and economic globalization and actively open its market to the world. The exhibition covers seven major industries, including service trade, automobile, high intelligent high-end equipment, consumer electrical machinery and equipment. Fuji Electric Co., Ltd. also participated in the exhibition. With the theme of energy and environment business, in the 108 square meters, blue and white Fuji Electric Exhibition Hall, energy optimization and stabilization were carried out; Achieve stable operation and energy-saving effect of the plant; Environmental measurement of air pollution, etc., to the optimal operation of equipment; It also saves labor and people, and provides four displays of food safety and reassurance.

MORE +

琦威(香港)有限公司

Kiwell (Hongkong) Co., Ltd.

Add:  Workshop Unit No. A6, 8/F, Hoplite Industrial Centre, No. 3 & 5 Wang Tai Road, Kowloon Bay, Kowloon, Hongkong

Tel:852 3171 1488  

Fax:852 3111 6959

佛山市琦威电气技术有限公司

Kiwell (Foshan) Electric Technology Co., Ltd.

Add :  Floor 3,Block 5,No.23,Xinghua Road,

           Zhangcha Street,Foshan Clty,Guangdong Province

Tel :   0757-83276620    13827717320 

Fax :  0757-83992196

Mailbox: info@kiwell.cn

 

img

WeChat Offical Account